Announcement

Collapse
No announcement yet.

Need Some help with this Inverter SCHNEIDER 6.8 KW 48 VDC GRID TIE BATTERY INVERTER

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Hi Mike,
    Can the combox set the system time? I don't have the SCP. that is what the programmer use to set the time. The configuration tool can set time too. but I can't seem to find any where could change or set the system time on the inverter with the combox.
    Thank you.

    Comment


    • #32
      The system time is set IN the combox. That gets broadcast to other devices.
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

      Comment


      • #33
        Originally posted by Mike90250 View Post
        The system time is set IN the combox. That gets broadcast to other devices.
        I can't see the system time. Can I see the system time and change it if necessary without the SCP or the the configuration tool with only the inverter and combox in my procession?
        Thank you.

        Comment


        • #34
          System time setting here:

          ComboxTimeSet.jpg
          Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
          || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
          || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

          solar: http://tinyurl.com/LMR-Solar
          gen: http://tinyurl.com/LMR-Lister

          Comment


          • #35
            Well past the point of no return, as of now gotten it yesterday. With respect to the program firmware overhaul, I do have an or more that is associated with the power organization specifically, so I would not out of intensity for the combox and the PC. great to know, however. Much obliged to you.

            Comment


            • #36
              Originally posted by Mike90250 View Post
              System time setting here:

              ComboxTimeSet.jpg
              Thank you Mike,
              Normally under windows if an item has sub-menu, when you double click it, the sub-menu will appear, but this one doesn't. I could click it until new kingdom come it won't appear. because the laptop I use is a small two in one 11.6 inches that I couldn't see or I don't know need to click on the little button on the left to open the sub-menu.

              Thank you again, really appreciated.

              Comment

              Working...
              X