Thanks I will look into that
Affordable Charge Controller for AGM Battery
Collapse
X
-
-
Comment
-
You know you can run a 50w A/C Bulb Direct off battery. If not now you do.Comment
-
Comment
-
Comment
-
Comment
-
Comment
-
Comment
-
Typically a 200watt panel would have a Vmp ~ 18 - 19volts which would make the Imp ~ 11amps (200w / 18v = 11.1amps) at best but more likely about 10amps tops.Comment
-
Comment
-
Comment
-
Ok so my next q is would a quality MPPT controller be more reliable than the elcheapo that is supplied with panel I think it is called a sun lite Chinese made? I was thinking a victron 75/15 ?Comment
-
Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-ListerComment
-
You're on the right track in my opinion, victron has a five year warranty and a great reputation. Tons of very cool and Technical looking stuff on their website.Comment
Comment