Looks like one of my inverters is failing. It was reporting a 18xBF HW error over and over. The cycle was: begin producing (clicks), 1 to 2 seconds later it would stop and report the error, then do a 30 second wakeup and start the cycle over.
I powered it completely down on AC and DC side for a few minutes, but that didn't help. However, I noticed it didn't error out as long as the clouds had the output down to about 400w or less. As soon as it tried to go over 500w it would trip off again.
A Google search showed nothing for this error code. Anyone else seen this? My other inverter seems to be working fine.
Solaredge gets an early call from me tomorrow, woooo!
I powered it completely down on AC and DC side for a few minutes, but that didn't help. However, I noticed it didn't error out as long as the clouds had the output down to about 400w or less. As soon as it tried to go over 500w it would trip off again.
A Google search showed nothing for this error code. Anyone else seen this? My other inverter seems to be working fine.
Solaredge gets an early call from me tomorrow, woooo!
Comment