Tweet
That's good info, Mike, but it makes me wonder even more, why is the connection to the charge controller so haphazard in comparison? The stranded wire bundle is just pushed into a square hole and held in place by a couple of flat metal sides that get squeezed together like a trash compactor when you turn a screw. That can't be making as good a connection as even a bad crimp job.
-
-
Because crimps are often hidden, and the controller screws generally visible.Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-ListerComment
Comment