635C06BC-D1ED-43C7-8BC3-1C70182A533C.jpeg I have four Renogy 100 W panels wired in parallel.
I tested each panel individually, while hooked up to a battery that is 100% full. Each individual panel was giving me 20 V and approximately 2 A
when I hooked all four together the charge controller was still saying roughly 20 V and roughly 2 A.
do I have a problem somewhere or is the battery so full that the charge controller is not putting more into it?
I tested each panel individually, while hooked up to a battery that is 100% full. Each individual panel was giving me 20 V and approximately 2 A
when I hooked all four together the charge controller was still saying roughly 20 V and roughly 2 A.
do I have a problem somewhere or is the battery so full that the charge controller is not putting more into it?
Comment