Hello,
Im new to this forum as is my history of solar panel systems. I have two Panasonic 330w panels wired in parallel with Renogy MC4 parallel connectors. in the evening light i was receiving 62V and about 4.00 amps per panel. However, when i connect them in parallel I'm not getting the increased amperage. its still reading as if i were taking a reading from one single panel. I've contacted Renogy tech support and they mentioned that because it was open circuit it may not read combined amperage. im not entirely sure if that statement is correct. If you could assist in steering me in the right direction id be very grateful!
Thank you for any help you may provide.
Im new to this forum as is my history of solar panel systems. I have two Panasonic 330w panels wired in parallel with Renogy MC4 parallel connectors. in the evening light i was receiving 62V and about 4.00 amps per panel. However, when i connect them in parallel I'm not getting the increased amperage. its still reading as if i were taking a reading from one single panel. I've contacted Renogy tech support and they mentioned that because it was open circuit it may not read combined amperage. im not entirely sure if that statement is correct. If you could assist in steering me in the right direction id be very grateful!
Thank you for any help you may provide.
Comment