Hey there. Just turning on the system for the first time to commission. having a few issues:
1) When I turn it on, I get all three lights (green, red, blue) for about 2 minutes, then they turn off and nothing further happens. The screen reads SMA SOLAR TECHNOLOGY and that is it. If I plug a ethernet cord in, I will get a blue light. The info I have seen says I should get a series of messages after this boot up on the screen.
2) When I use the SMA initiation wizard, I can't get past step three where it asks for country standard. There are no options to select, therefore I can't save and proceed to setup the system. I am wondering if not being able to complete setup is the reason I am getting no info in step 1.
3) Lastly and most concerning is that the inverter seems to reboot itself every 10 minutes or so. There are no error codes or lights, it just reboots and starts up again.
System
7.7 SMA Sunny Boy
2 - 12 panel strings with TSR4's
310 watt panels
1) When I turn it on, I get all three lights (green, red, blue) for about 2 minutes, then they turn off and nothing further happens. The screen reads SMA SOLAR TECHNOLOGY and that is it. If I plug a ethernet cord in, I will get a blue light. The info I have seen says I should get a series of messages after this boot up on the screen.
2) When I use the SMA initiation wizard, I can't get past step three where it asks for country standard. There are no options to select, therefore I can't save and proceed to setup the system. I am wondering if not being able to complete setup is the reason I am getting no info in step 1.
3) Lastly and most concerning is that the inverter seems to reboot itself every 10 minutes or so. There are no error codes or lights, it just reboots and starts up again.
System
7.7 SMA Sunny Boy
2 - 12 panel strings with TSR4's
310 watt panels
Comment