I'm trying to set up my new charge controller and need some advice on charging parameters. I have a bank composed of 4 Vetus 12 volt sealed batteries on my boat. The batteries are about 5 years old. I don't have the instructions that came with the batteries and Vetus has been of no help. The stick on the batteries says:
Boost voltage 14.5 - 14.9 volts
Float Voltage 13.6 - 13.8 volts
Is the Boost voltage the value I should set for absorption? or is this an equalization voltage? My bank is wired for 24 volts so I will be multiplying by 2
Any advice appreciated
Boost voltage 14.5 - 14.9 volts
Float Voltage 13.6 - 13.8 volts
Is the Boost voltage the value I should set for absorption? or is this an equalization voltage? My bank is wired for 24 volts so I will be multiplying by 2
Any advice appreciated
Comment