My SolarEdge inverter (located outside) has been directly connected to my home LAN via an ethernet cable since 2018. That way I can monitor my SOLAR power output inside the house directly with my laptop - or so I thought.
I was getting output updates every 30-45 minutes.
But two months ago the SolarEdge monitoring "App" updating speed slowed down to intervals of 3 hours or much longer, which is unacceptable.
Further, I was expecting to be able to read the "power output" in real time on my laptop (and all other parameters) like you can on the inverter panel.
That never happened - and SolarEdge tech support said that's not possible.
The very long delay between power output updates is identical on my cell phone app.
Are you fellow SolarEdge inverter customers experiencing the same poor performance as I am?
And why can't I read "instantaneous" power output from the inverter on my laptop, which is ethernet-connected to the inverter?
Thanks in advance for your replies.
I was getting output updates every 30-45 minutes.
But two months ago the SolarEdge monitoring "App" updating speed slowed down to intervals of 3 hours or much longer, which is unacceptable.
Further, I was expecting to be able to read the "power output" in real time on my laptop (and all other parameters) like you can on the inverter panel.
That never happened - and SolarEdge tech support said that's not possible.
The very long delay between power output updates is identical on my cell phone app.
Are you fellow SolarEdge inverter customers experiencing the same poor performance as I am?
And why can't I read "instantaneous" power output from the inverter on my laptop, which is ethernet-connected to the inverter?
Thanks in advance for your replies.
Comment