Originally posted by sunpoweredev
View Post
Announcement
Collapse
No announcement yet.
Most Popular Topics
Collapse
PTO received - system up and running
Collapse
X
-
https://pvoutput.org/list.jsp?userid=59404 -
Originally posted by macaddict View Post
I use NJSREC. I usually get the check within 2 business days. No extra fees.
Do you know what sets them apart? srectrade at 7%, flettexchange at $2.50 flat, and no fees with NJSREC. Just curious how they can operate without charging fees.https://pvoutput.org/list.jsp?sid=69875Comment
-
Originally posted by sunpoweredev View Post
Thanks.
Do you know what sets them apart? srectrade at 7%, flettexchange at $2.50 flat, and no fees with NJSREC. Just curious how they can operate without charging fees.https://pvoutput.org/list.jsp?userid=59404Comment
-
Originally posted by macaddict View Post
The price per SREC is a tiny bit lower.https://pvoutput.org/list.jsp?sid=69875Comment
-
Originally posted by sunpoweredev View Post
They just gave me full access. Now I can access the admin tab, in addition to dashboard/layout/charts/reports/alerts. Thanks!
FYI my system just went LIVE today and I only have the Dashboard and Layout tabs...just emailed Operations and Mike S. directly for "Full" access. Updates soon on my thread.....12.35 kW - https://pvoutput.org/list.jsp?sid=67749Comment
-
Originally posted by NJturtlePower View Post
Who did you email for this change?
FYI my system just went LIVE today and I only have the Dashboard and Layout tabs...just emailed Operations and Mike S. directly for "Full" access. Updates soon on my thread.....
I emailed Kevin, one of their senior project managers.
I emailed SolarEdge directly regarding the virtual device screen. They told me only installer's account can view the screen, and that my only option is to register an installer's account and revoke GPE's access. I'm not going to do that so no virtual device screen for me.https://pvoutput.org/list.jsp?sid=69875Comment
-
Originally posted by sunpoweredev View PostThat was just about a week from you signing and PTO right? Congrats!
I emailed Kevin, one of their senior project managers.
I emailed SolarEdge directly regarding the virtual device screen. They told me only installer's account can view the screen, and that my only option is to register an installer's account and revoke GPE's access. I'm not going to do that so no virtual device screen for me.
Question about PVoutput logs for maybe flowing or macaddict ButchDeal
Should I be seeing Temperature or Voltage data in my daily logs...mine are blank? I realize the other columns are consumption meter based, but figured temp and voltage SHOULD be inverter based. Maybe limited due to current access?
123.jpg 12.35 kW - https://pvoutput.org/list.jsp?sid=67749Comment
-
Anyone else please keep me honest, but I think temperature data only comes from a weather station that you link. I don't have my own, so I'm using openweathermap, which plays with pvoutput and was easy to figure outhttps://www.pvoutput.org/list.jsp?sid=73948Comment
-
Last edited by NJturtlePower; 09-05-2019, 02:08 PM.12.35 kW - https://pvoutput.org/list.jsp?sid=67749Comment
-
Originally posted by ButchDeal View PostThere isn't an "Admin" access level. What you want is a Role of "Full Access" and check "Site Owner" box.
SE access.jpg
sunpoweredev What did your SolarEdge auto email say once you got the Admin tab?12.35 kW - https://pvoutput.org/list.jsp?sid=67749Comment
-
Originally posted by NJturtlePower View Post
Question about PVoutput logs for maybe flowing or macaddict ButchDeal
Should I be seeing Temperature or Voltage data in my daily logs...mine are blank? I realize the other columns are consumption meter based, but figured temp and voltage SHOULD be inverter based. Maybe limited due to current access?OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Reading back through the thread, all this consumption data is making me jealous. I wish it had occurred to me to ask GPE about it earlier in the process, although it would have been hard to justify at $800.
I noticed that my REC meter was dead about a week ago, also. Not sure how long it's been that way, but they're supposed to be coming by to replace it in the next few days. Apparently there's no big hurry since the generation data has been getting uploaded to the solaredge platform, so they'll be able to reconcile the new meter. They must have gotten a bad batch or something.https://www.pvoutput.org/list.jsp?sid=73948Comment
-
Originally posted by ButchDeal View Post
If you pay (donate) you can get the temperature of the inverter into the graph.
***UPDATE: Sure enough there it (temp & voltage) is now***
As far as the Admin tab, NOW after reloading my page once again it's there....not sure if the SE servers just needed to refresh or GPE did something more, but it's all there now.
Site Picture updated w/ personal info/details chopped out.
SE access2.jpg PVoutput tempandvolt.jpgLast edited by NJturtlePower; 09-05-2019, 03:10 PM. Reason: Temp & Voltage now displayed on PVoutput12.35 kW - https://pvoutput.org/list.jsp?sid=67749Comment
-
Originally posted by NJturtlePower View Post
I did donate and just enabled those two options I screenshot above, still nothing....guess I'll just give it a minute.
As far as the Admin tab, NOW after reloading my page once again it's there....not sure if the SE servers just needed to refresh or GPE did something more, but it's all there now.
Site Picture updated w/ personal info/details chopped out.
SE access2.jpg
I wish it pulled AC voltage as well as that can be quite telling to many people.
You can also make a public view to your solaredge site if you like and don't forget to play with the Alerts. Be forewarned though that they can go off in weather events if you set the time period too short.OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Originally posted by NJturtlePower View Post
So just went back and forth a few times with a GPE rep, went from "Dashboard and Layout", to "Full Access' to "Full Access & Site Owner" and still no Admin tab showing on my portal after logging out/in.
SE access.jpg
sunpoweredev What did your SolarEdge auto email say once you got the Admin tab?https://pvoutput.org/list.jsp?sid=69875Comment
Comment