Does anyone know the interval when SolarEdge update its data? my panel rea 3.2kw portal reads 900w. 900 watts would mean like 7:30 this morning. Relatively sunny day
Announcement
Collapse
No announcement yet.
Most Popular Topics
Collapse
What's the update interval for SolarEdge monitoring?
Collapse
X
-
You using the browser monitoring portal? From my limited experience the dashboard doesn't auto update. You need to refresh the page and it will pull the most recent data
The other possibility is the common zigbee inverter communication failure. Might not be pulling any data -
I've found that the zigbees are usually slower than a direct or powerline communicator connection. Direct connection updates every 15 minutes, but you may have to refresh the site.Comment
-
I just got access to my monitoring website and I'm setup with the GSM Cellular kit. It seems to be updating every 4 hours. I called SolarEdge to see if they could set it in "High Bandwidth" and they told me that they couldn't because I'm using the Cellular kit. Has anyone been able to update the refresh rate using the Cellular kit any other way? Looking at the Cellular kit manual, it seems that it should be editable from the inverter itself but I cannot find that menu item.https://pvoutput.org/list.jsp?userid=59404Comment
-
Originally posted by macaddict View PostLooking at the Cellular kit manual, it seems that it should be editable from the inverter itself but I cannot find that menu item.
If so they would have a financial incentive to NOT provide you with a way to increase the amount of data since they're paying the cellular carrier for each extra byte sent.
My guess would be the firmware tells the cellular kit what to do for a refresh rate, and it's possible to change it via a firmware change. But it's not something they want to give an end user.
Comment
-
Originally posted by foo1bar View PostDoesn't the cellular kit come with the first year of data free?
If so they would have a financial incentive to NOT provide you with a way to increase the amount of data since they're paying the cellular carrier for each extra byte sent.
My guess would be the firmware tells the cellular kit what to do for a refresh rate, and it's possible to change it via a firmware change. But it's not something they want to give an end user.
https://pvoutput.org/list.jsp?userid=59404Comment
-
Originally posted by macaddict View Post
I just plugged in an Ethernet cable (I setup an old Wi-Fi router that I had sitting around as an Ethernet Bridge) and change the setup to use the LAN connection to connect to the server instead of Cellular. It seems to be updating every 15 minutes now...CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
Originally posted by sensij View Post
If you get an API key from your intaller, you can use PVOutput (or write your own script) to get inverter data every 5 min.
Solaredge over Ethernet should be 5 min with or without pvoutput though.OutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
My Solaredge is definitely every 15 minutes. You can see it here: https://monitoringpublic.solaredge.c...ame=Lebanon_NJhttps://pvoutput.org/list.jsp?userid=59404Comment
-
Originally posted by macaddict View PostMy Solaredge is definitely every 15 minutes. You can see it here: https://monitoringpublic.solaredge.c...ame=Lebanon_NJ
on the sample from one of our sites you can clearly see data point at 12:20, 12:25, 12:30, etc....
Chart.jpgOutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
Originally posted by ButchDeal View Post
That view only shows 15 minute data. Click on the Chart icon near the top (you didn't share it with others), then select the inverter on the left, graph say AC power, zoom into an hour on any day....
on the sample from one of our sites you can clearly see data point at 12:20, 12:25, 12:30, etc....
Chart.jpg
It's also worth noting that after inverter startup, it will report at 5 minute intervals for about the first hour it seems (I had to restart mine because of an isue and got about an hour of 5 minute data while still on GSM). Note that this doesn't appear to be the case after waking up from night modeComment
-
Originally posted by jasonvr View Post
I can confirm this on my system as well. My installer did the GSM kit but I was unhappy with the resolution, so I ran an Ethernet cable this past weekend (June 17). All my data up thru the 17th is at 15 minute rez. Starting on the 18th I'm at 5 minute (I plugged in the cable after the sun was down on the 17th to not interrupt production). Unfortunately there's no caching of info in the inverter apparently to be able to pull a day or two earlier than that retroactively.
It's also worth noting that after inverter startup, it will report at 5 minute intervals for about the first hour it seems (I had to restart mine because of an isue and got about an hour of 5 minute data while still on GSM). Note that this doesn't appear to be the case after waking up from night mode
CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
I really wish they would add inverter temperature to the charts. I imagine it's being logged on the 5 min update.Comment
-
Originally posted by BFW577 View PostI really wish they would add inverter temperature to the charts. I imagine it's being logged on the 5 min update.
SolarTemperature.JPGComment
Comment