Trying to start small and expand, here's what I have hardware wise currently:
4 HQST 100watt 12v 36cell pannels
2 Enphase IQ6plus microinverters
4 sets of roof mounting Z brackets + bolts washer and screws
So my thinking is: I run each pair of pannels in serries to each micro inverter ( delivering 200watts 24v dc to each micro inverter). Then combine the resulting 240v ac from the microinverters into a single line, and run into breakerbox. Is this plan feasible and what sort of cabling/additional parts do I need to do this, if so?
Thanks,
Comment