Wait... This is a West facing panel? The adjacent panels are producing less than 20W, nothing to see here. Of course it isn't generating first thing in the morning. The panels don't all report simultaneously, and sometimes you can go 30 min without a report. This is not abnormal.
SolarEdge P400 Optimizer not reporting data
Collapse
X
-
-
Okay here is the string in question and I added the other string same day. Panel 1.11.1was the optimizer that reported lateComment
-
Neat charts! I'm used to looking at arrays with a single orientation, the multi-facets add some personality. I think 1.1.11 is fine.CS6P-260P/SE3000 - http://tiny.cc/ed5ozxComment
-
Comment
-
Turns out there is something wrong with the optimizer where it has a problem waking up. I had to re-pair the optimizer to the inverter again today as it was not producing and its a sunny day no clouds and all the other panels near it were producing for hours. The orange line on the right is when it started producing after re-pair at 11:40 amLast edited by Afrmthabay; 11-07-2017, 07:11 PM.Comment
-
Update- my installer came by and replaced the P400 optimizer after I texted him yesterday -that was a fast responseComment
Comment