Hi. I am a newbie to solar (but with good background in electronics).
I am building a "hobby" system just to learn. Will not be using this in real-world.
I have been given some free panels - SRP Model BBPV-250W. Specs are -
Vmp (voltage at peak power) 47.2V
Imp (current at peak power) 5.30A
Why is the Vmp rating so high for this panel??
I realise this Vmp is much higher than I have typically read about in blogs.
Can I use this panel with a 12 solar controller and charge a 12V battery?
I have a cheap 40A MPPT charger so I think it should work.
Any suggestions, advice, comments, warnings?
Much appreciated
I am building a "hobby" system just to learn. Will not be using this in real-world.
I have been given some free panels - SRP Model BBPV-250W. Specs are -
Vmp (voltage at peak power) 47.2V
Imp (current at peak power) 5.30A
Why is the Vmp rating so high for this panel??
I realise this Vmp is much higher than I have typically read about in blogs.
Can I use this panel with a 12 solar controller and charge a 12V battery?
I have a cheap 40A MPPT charger so I think it should work.
Any suggestions, advice, comments, warnings?
Much appreciated
Comment