I have the 45amp tristar mppt controller and two of the 48v powerwalls from bigbattery.com (https://bigbattery.com/product/48v-li-ion-powerwall/). These powerwalls each have one anderson sb50 port so i was going to make two y connectors, one to parallel them and another to go from the batteries that are connected to the inverter i have and the charge controller (similar to this but with 6 awg wires https://www.techdirectclub.com/ander...llel-cable-36/). I have the dipswitches set on my charge controller but have not hooked it up to my computer yet as i do not know what values to enter for things like absorption, float, and what not. If any of you can provide some insight, that would be appreciated.
Thanks
Thanks
Comment