Hi All,
I have a large boat and have installed a 2kw array and a house bank of 8 x 6 volt Trojan T16 FLA in series for a 48 volt system. I have a xantrex SC and a cheap chinese 6000w inverter. The layout is the SC and inverter on a wall in the stern cabin all hooked to the inverter and then long heavy cables to the battery bank in the bilge about 30ft away. The question is I picked up a new SC as a backup and the instructions state the SC must be run directally to the batteries VS the inverter.
I can do this but my understanding was the SC can be any point on the 48 volt loop. Am I missing something. ?? Also I am thinking about a new inverter in the 4000 to 6000 w range as a back up to the existing Power Jack unit and I welcome recomindations.
Thanks Upston
I have a large boat and have installed a 2kw array and a house bank of 8 x 6 volt Trojan T16 FLA in series for a 48 volt system. I have a xantrex SC and a cheap chinese 6000w inverter. The layout is the SC and inverter on a wall in the stern cabin all hooked to the inverter and then long heavy cables to the battery bank in the bilge about 30ft away. The question is I picked up a new SC as a backup and the instructions state the SC must be run directally to the batteries VS the inverter.
I can do this but my understanding was the SC can be any point on the 48 volt loop. Am I missing something. ?? Also I am thinking about a new inverter in the 4000 to 6000 w range as a back up to the existing Power Jack unit and I welcome recomindations.
Thanks Upston
Comment