Originally posted by createthis
View Post
Originally posted by createthis
View Post
When you get your batteries use the busbars and wire all 4 in parallel and walk away for a couple of hours. The decide on Top or Bottom, your choice. If you Bottom discharge them to 2.5 volts, let them rest, repeat until when at rest they are at 2.5 vpc an dlet them rest 12 hours. Your target is anywhere from 2.4 to 2.5 range.
If you decide on Top Balance charge to 3.65 volts and hold until charge current drops to C/33. With all 4 cells in parallel that is 400 AH / 33 Hours = 12 amps. Additionally buy yourself a 4 S JST Balance Plug from any Hobby Shop. When you wire the batteries in series you can do your maintenance and Top Balance checks with your Cellpro 8. You will thank me later for that advice once you realize what it can do. Trick is you will need a good 1500 watt 18 volt DC power Supply to take full advantage of the Cellpro Power Lab 8. If you are not aware it will do bidirectional charging from one battery to another of any chemistry know today and all future types.
Good luck.
Comment