Making a 12 Volt Battery Bank Using QTY 6 of 6 Volt GC2 Batteries

[SunEagle]

Hello, OK, believe it or not, I have spent 1/2 a day researching making a QTY of Six x 6 Volt GC2s into a 12 Volt bank. You can find a gazillion 4 x 6 Volt pics and articles but very few utilizing 6 x 6 Volt Batteries. I wanted the opinion of the pros here. I have seen a few pics and didn't really like what I had seen around the net. This is what I am thinking is a correct config, so far. I would really appreciate opinions, ideas and the Yeas and Nays!

Thanks for everyone's time and help.

Is This The Best Way To Configure 6 x 6 Volt GC2 Batteries for a 12 Volt Bank? Below is a picture of the best I have found, I think.

http://prntscr.com/80s5el

Thanks for taking the time to look.

One reason you have not found a lot of good information for a 12v battery system using 6 x 6v units is because going with 3 parallel sets can cause issues by not charging or discharging all of the batteries equally.

The attached link called Smart Gauge shows different wiring techniques for battery systems. To get an idea for your system think of one of the 12volt batteries in the diagrams on that website as 2 of your 6v wired in series.

[Wyreless]

Hello, OK, believe it or not, I have spent 1/2 a day researching making a QTY of Six x 6 Volt GC2s into a 12 Volt bank. You can find a gazillion 4 x 6 Volt pics and articles but very few utilizing 6 x 6 Volt Batteries. I wanted the opinion of the pros here. I have seen a few pics and didn't really like what I had seen around the net. This is what I am thinking is a correct config, so far. I would really appreciate opinions, ideas and the Yeas and Nays!

Thanks for everyone's time and help.

Is This The Best Way To Configure 6 x 6 Volt GC2 Batteries for a 12 Volt Bank? Below is a picture of the best I have found, I think.

http://prntscr.com/80s5el

Thanks for taking the time to look.