Announcement

Collapse
No announcement yet.

Setting up charging station for mobile battery use

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by cbird02 View Post

    I just realized the switch I ordered is 12V and the panel is 30V, 9A. How about this? I can trip when I remove battery #2 out and reset after Battery #1 is connected I am good with a 30Amp breaker since my CC is rated for 30A and I have 10AWG wire. The battery fuse of course will be smaller 10amp

    Breaker.JPG
    That device should be able to "break" a DC circuit and not fry or arc. I use one on my small solar/battery system. Just make sure your wires are rated for that switch.

    Comment

    Working...
    X