Inverters and charges providers

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bghayad
    Junior Member
    • Sep 2014
    • 16

    Inverters and charges providers

    Hello;

    It will be so kind if to be advised about the good providers (recommended) for chargers and inverters providers (manufactures).

    Thanks in advance.

    Regards
    Bilal
  • Mike90250
    Moderator
    • May 2009
    • 16020

    #2
    Originally posted by bghayad
    Hello;
    It will be so kind if to be advised about the good providers (recommended) for chargers and inverters providers (manufactures)....
    1) what area of the world ?

    2) what wattage is your load

    3) input (DC) voltage

    4) output (AC) voltage. single, split, or poly phase ?
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    • bghayad
      Junior Member
      • Sep 2014
      • 16

      #3
      1) what area of the world ?
      Lebanon and middle east (syria, iraq, jordan, ... etc).

      2) what wattage is your load
      1KW, 2KW up to 10KW.

      3) input (DC) voltage
      24VDC, 48 VDC and 96 VCD

      4) output (AC) voltage. single, split, or poly phase ?
      220 - 250 VAC single phase for the time being. But later on, we will need three phase when we start work with the water pumps.
      Regards
      Bilal

      Comment

      Working...