I intend to use this board to Solar maintain a charge on a 3.2 vdc 3500maH LiFePO4. The battery will be in parallel with the internal batteries (2 NiMh in Series) to provide external power for a digital camera (no flash). The camera has an external controller that controls on/off and Shutter.
I will be using a 6 volt Solar Panel but was wondering how large of one I would need. The charge current will be set for 500ma.
Bill
I will be using a 6 volt Solar Panel but was wondering how large of one I would need. The charge current will be set for 500ma.
Bill
Comment