PVB vs EVA and IP65 vs IP67

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thebe
    Junior Member
    • Mar 2015
    • 9
    #1

    PVB vs EVA and IP65 vs IP67

    Hi masters,

    I am newbie in this kind of technology.
    I have some question to be asked.
    1. what is the different between PVB and EVA? which is better for G2G lamination?
    2. how to differ IP65 and IP67 from physical and visual appearance?

    Thanks a lot.

    Regards,
    TB
    Tags: None
  • Mike90250
    Moderator
    • May 2009
    • 16020
    #2
    I totally understand the question, but I don't know the answer. You will have to look up the data sheets to figure it out.
    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment

    • thebe
      Junior Member
      • Mar 2015
      • 9
      #3
      Originally posted by Mike90250
      I totally understand the question, but I don't know the answer. You will have to look up the data sheets to figure it out.
      for IP65 and IP67, I have read the different in protection degree. But how with visual appearance.
      my supplier said that IP65 just potting the diode area, but IP67 not only diode area but also terminal area. is it true that we can differ it from these explanation?
      I need more information.
      thanks.

      Comment

      Previous template Next
      Working...