What's all this shorter alias means?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paulwater
    Junior Member
    • Feb 2014
    • 18

    #1

    What's all this shorter alias means?

    Hello guys
    I have question about some shorter alias on my poly-crystalline panel

    Pmax 4.3W
    Voc 9.6V
    Vmp 8.0V
    Isc 0.59A
    Imp 0.54A

    Well,I could't found the full name,and don't know how to use those number!

    Thank you!

    Paul
  • SunEagle
    Super Moderator
    • Oct 2012
    • 15210

    #2
    Originally posted by paulwater
    Hello guys
    I have question about some shorter alias on my poly-crystalline panel

    Pmax 4.3W
    Voc 9.6V
    Vmp 8.0V
    Isc 0.59A
    Imp 0.54A

    Well,I could't found the full name,and don't know how to use those number!

    Thank you!

    Paul
    Pmax = maximum panel power in watts (panel or cell wattage)
    Voc = open circuit voltage (helps determine the input voltage to a charge controller)
    Vmp = maximum panel output voltage (used to determine panel or cell wattage)
    Isc = Short circuit current in amps (helps determine fuse and wire size)
    Imp = maximum panel output in amps (used to determine panel or cell wattage)

    If you multiply the Vmp x Imp = Pmax. Or 8.0 volts x 0.54 amps = 4.3 watts. But these numbers are determined under lab or perfect light conditions.

    Hope that clears it up somewhat.

    Comment

    • paulwater
      Junior Member
      • Feb 2014
      • 18

      #3
      Originally posted by SunEagle
      Pmax = maximum panel power in watts (panel or cell wattage)
      Voc = open circuit voltage (helps determine the input voltage to a charge controller)
      Vmp = maximum panel output voltage (used to determine panel or cell wattage)
      Isc = Short circuit current in amps (helps determine fuse and wire size)
      Imp = maximum panel output in amps (used to determine panel or cell wattage)

      If you multiply the Vmp x Imp = Pmax. Or 8.0 volts x 0.54 amps = 4.3 watts. But these numbers are determined under lab or perfect light conditions.

      Hope that clears it up somewhat.
      Hello SunEagle
      Thank you for the explain me the determine part and full name,very clear!
      So,if we are in lab I wana charging one 6V,10Ah Pb battery with that panel
      Is recharging time calculation like below?

      Battery capacity:6Vx10Ah=60watts
      4.3w/60w=13.9 hr

      we will use almost 14hrs to finish charging,right?

      Thank you!

      Comment

      Working...