Tweet
I want an app so I can see how my solar is doing what should I use? I haven't got an iPhone just an HTC.
-
-
some solar gear has web page reporting, so you just use a browser.Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-Lister -
Depends on System
I have Enphase microinverters on my system. Enphase has an app to track your system on your phone as well as a website to track your daily use. That is one of the reasons I went with Enphase. If your system has an Internet connection I would expect you can get an app for it. Good luck.Comment
-
pvoutput.org has an appOriginally posted by mick68 View Post
http://www.pvoutput.org/help.html#in...on-mobile-appsOutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
-
I have an iPhone and iPad and I couldn't get the PVOutput app to connect correctly. I received 3-5 minute updates and then it quit I could not get it to connect. I did some checking the App hadn't been updated since 2011 I just rechecked after seeing this post they just recently updated it and now it works fine.Comment
-
Need Help on PVOutput
I have Enphase microinverters and registered with PVOutput, but couldn't quite see how to set up data auto upload. Any suggestions? I noticed PVOutput supports Enphase Envoy internet communications. I have the Enlighten working on my phone and computer, but was interested in the PVOutput.org features.Comment
-
http://www.pvoutput.org/help.html#autoupload-enphaseOriginally posted by Ward L View PostOutBack FP1 w/ CS6P-250P http://bit.ly/1Sg5VNHComment
Comment