Announcement

Collapse
No announcement yet.

converting from low profile to tank above..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by LucMan View Post
    Solar Pathfinder Assistant can calculate the output capacity of your panel monthly. Download the evaluation version enter your panel model or dimensions, latitude, longitude, orientation, tilt, etc. The orientation and tilt can be changed in the software so that you can fine tune the output to your personal usage.
    That is potential rather than actual I presume

    Comment


    • #17
      Originally posted by r.bartlett View Post

      That is potential rather than actual I presume
      Yes, it is very accurate. I have the full version that I use, shading can be entered and the calculations have been on. You can then compare it to your output to find if there are problems. Or use it to project monthly / yearly output and energy savings.

      Comment

      Working...
      X