Is this normal? Does my system need tweaking?

[J.P.M.]

Further to this A.M.:

1.) How old is the system ?

2.) Have you contacted the installer ? Good installers are usually anxious to help. Info given here so far makes only guessing possible.

3.) I have Pentair flowmeters in my system. They've worked fine & trouble free for 6+years. try P/N LDF357B. P/N will be slightly diff. for different flow capacities and connections. I got sweated end version. I'd avoid nylon threaded version. Also, CAUTION: Do NOT use in direct sunlight. Price is about $85- $90 U.S., depending on source.

[russ]

How can I check the flowrate?

There should be a flow meter in the control section - a rotameter probably

[Flembot]

Hard to say. I'd check all the thermometer connections first. What's the flowrate ?

How can I check the flowrate?

[J.P.M.]

COLLECTER TEMP: 68.8 Degrees Celcius
BOTTOM OF STORAGE TANK TEMP: 53.3 Degrees C
TOP OF STORAGE TANK TEMP: 53.8

The pump is working at 95% Speed.

Should the storage tank be at a higher temperature or is this normal?

[ATTACH=CONFIG]4888[/ATTACH][ATTACH=CONFIG]4889[/ATTACH][ATTACH=CONFIG]4890[/ATTACH][ATTACH=CONFIG]4891[/ATTACH]

Apologies for the extra thumbnail in this thread. Im not sure how that got there.

Hard to say. I'd check all the thermometer connections first. What's the flowrate ?

[Flembot]

COLLECTER TEMP: 68.8 Degrees Celcius
BOTTOM OF STORAGE TANK TEMP: 53.3 Degrees C
TOP OF STORAGE TANK TEMP: 53.8

The pump is working at 95% Speed.

Should the storage tank be at a higher temperature or is this normal?

20140930_124727.jpg20140930_124748.jpg20140930_124800.jpg20140930_124917.jpg

Apologies for the extra thumbnail in this thread. Im not sure how that got there.