I noticed that one of my 11.4KW SE inverters was not producing power. I checked and it is showing that it is in night mode. I tried re-pair the optimizers. It found all 34 of them. When pairing the inverters, I see identical voltage before and after the DC disconnect. After pairing in complete, dc voltage drops down to 0, and the inverter enters sleep mode. My other inverters are generating power. Any thoughts?
Most Popular Topics
Collapse
SE Inverter Stuck in sleep mode
Collapse
X
-
-
I'd be wondering wonder what the installer said when you called and advised that you noticed a problem. -
Comment
-
In the Solar Edge monitoring platform it says the "Inverter State = Sleeping." My other inverters even at night say "Production." I cleared the pairings again and it found them again, so that would make me thing that the wiring and connectors are good.Comment
-
Give up on SE a while ago after 2 spare inverters send to me 1 doa and the second one not working.
You can request assistance true there webpage with direct chat they will check your inverter and advise.
Even as a diy they will assist at least they tried with me.
Good luck.Comment
-
Give up on SE a while ago after 2 spare inverters send to me 1 doa and the second one not working.
You can request assistance true there webpage with direct chat they will check your inverter and advise.
Even as a diy they will assist at least they tried with me.
Good luck.
Nothing can replace persistence. I'd keep trying to get answers from the horse's mouth.
Part of what you paid for was warranty assistance.Comment
-
Another thread "SolarEdge System Not Producing - No Errors". OP found inverter to be stuck in night mode and was dead.
Comment
Comment