What kind of conduit or protection should go on theses pv wires between panels? How about on the home run wires going to my midnite solar GT combiner box? I have 6 horizontal rows by 5 vertical panel array with 4 string of 7 and 8 panels so the home run wires are all over the matrix. Should I have all 4 of the home run wires meet in the middle and go into a piece of plastic conduit?
Also I got my Professional engineer to approve the 2x3" aluminum spacers under the S5! mounts which go into the roof rafters. Using 6" long structural steel screws. Coated for contact with the treated wood rafters. I have a bad feeling in 20 years I will have rust stains or leaks in the roof due to this. I am using Henry grey roof sealent
I've installed a couple of ground mount systems before. this is my first roof system and these indivdual mounts are a pain in the butt. to get all aligned.
IMG-4741.jpg
IMG-4740.jpg
Also I got my Professional engineer to approve the 2x3" aluminum spacers under the S5! mounts which go into the roof rafters. Using 6" long structural steel screws. Coated for contact with the treated wood rafters. I have a bad feeling in 20 years I will have rust stains or leaks in the roof due to this. I am using Henry grey roof sealent
I've installed a couple of ground mount systems before. this is my first roof system and these indivdual mounts are a pain in the butt. to get all aligned.
IMG-4741.jpg
IMG-4740.jpg
Comment