Enphase Envoy not finding microinverters

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jmiller29
    Junior Member
    • Mar 2017
    • 2
    #1

    Enphase Envoy not finding microinverters

    I have an Enphase Envoy that was working fine on my system before I moved. (I took it all with me.)
    Now I have it set up at the new house. It is not communicating with the microinverters. I deleted them all and did a new scan. Nothing found.
    The Envoy is 10 feet from the inverters so distance is not an issue. I've scanned 10 times and still nothing. Everything has been reset and tried again multiple times.
    The inverters are blinking orange meaning they are producing but not communicating.

    What can I do next? How do you FACTORY reset the envoy?
    Tags: None
    • jmiller29
      Junior Member
      • Mar 2017
      • 2
      #2
      Well, how about that? Just after I asked the question, they started working. Nevermind.

        Comment

        • Mike90250
          Moderator
          • May 2009
          • 16020
          #3
          Originally posted by jmiller29
          Well, how about that? Just after I asked the question, they started working. Nevermind.
          Glad to be of help. They know us by reputation. Good Luck.
          Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
          || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
          || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

          solar: http://tinyurl.com/LMR-Solar
          gen: http://tinyurl.com/LMR-Lister

            Comment

            Previous template Next
            Working...