Just installed a 7.56 KW solar system and turned it on.. City electrical inspection approved and I filled out the Net Metering paperwork with my utility company DTE but it hasn't been completed yet. Their website says they want to come out to do an inspection once the system is ready to be turned on... change meter, inspect disconnect, etc.
When I turn on my solar system, my smart meter's digital readout for real time kWh goes negative.. Like instead of saying I'm drawing 0.90 kWh, it will say -2.50 kWh...
I haven't had the opportunity to confirm its registering the reverse current via the "Total kWh Readout" because we had thick clouds, then bright sunshine, then thick clouds and I'm running the air compressor and welder on and off all day.. To hectic to know what's going on..
Are these digital smart meters already set up to register reverse current?? I'd like to just turn the system on and let it run...
When I turn on my solar system, my smart meter's digital readout for real time kWh goes negative.. Like instead of saying I'm drawing 0.90 kWh, it will say -2.50 kWh...
I haven't had the opportunity to confirm its registering the reverse current via the "Total kWh Readout" because we had thick clouds, then bright sunshine, then thick clouds and I'm running the air compressor and welder on and off all day.. To hectic to know what's going on..
Are these digital smart meters already set up to register reverse current?? I'd like to just turn the system on and let it run...
Comment