X
 
  • Time
  • Show
Clear All
new posts
  • Solar_in_Amazon
    Junior Member
    • Aug 2013
    • 2

    #1

    Solar energy system in the Amazon

    Hi all,

    I am currently researching for a thesis where i will develop a sustainable energy system for a community in the Ecuadorian Amazon. What would be the forum's opinion on a successful system for this area? Keep in mind it is usually between 90-100% humidity.

    I have come across some articles relating to solar energy systems, but it seems the panels, inverters, controllers and batteries (lead-acid) have little reliability and high potential to corrdoe in humid environments. So I want to ask the forum if they had any ideas, suggestions or recommendations in designing a system for a high humid environment such as this? Preferably, the system would be as reliable (minimal failures) and as long-lasting (10 years+) as possible.

    Thanks in advance
    Alex
  • Naptown
    Solar Fanatic
    • Feb 2011
    • 6880

    #2
    All true
    The only way around it is to use very high quality components that are tested and rated for high humidity.
    NABCEP certified Technical Sales Professional

    [URL="http://www.solarpaneltalk.com/showthread.php?5334-Solar-Off-Grid-Battery-Design"]http://www.solarpaneltalk.com/showth...Battery-Design[/URL]

    [URL]http://www.calculator.net/voltage-drop-calculator.html[/URL] (Voltage drop Calculator among others)

    [URL="http://www.gaisma.com"]www.gaisma.com[/URL]

    Comment

    • Solar_in_Amazon
      Junior Member
      • Aug 2013
      • 2

      #3
      Do you (or anybody else on the forum) know where I can find high quality instruments tested for humidity?

      Comment

      • Mike90250
        Moderator
        • May 2009
        • 16020

        #4
        I believe Morningstar makes some charge controllers that are conformal coated, and Outback makes some sealed inverters.
        Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
        || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
        || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

        solar: http://tinyurl.com/LMR-Solar
        gen: http://tinyurl.com/LMR-Lister

        Comment

        • Naptown
          Solar Fanatic
          • Feb 2011
          • 6880

          #5
          Sunpower panels are tested for humidity far beyond the standard.
          One glitch there, finding a dealer that will sell them to you.
          As far as charge controllers go I like Morningstar but outback and others are equal quality or better.
          Inverters I have no idea
          Batteries are pretty corrosion resistant all by themselves other than the terminals which will corrode in the desert m
          NABCEP certified Technical Sales Professional

          [URL="http://www.solarpaneltalk.com/showthread.php?5334-Solar-Off-Grid-Battery-Design"]http://www.solarpaneltalk.com/showth...Battery-Design[/URL]

          [URL]http://www.calculator.net/voltage-drop-calculator.html[/URL] (Voltage drop Calculator among others)

          [URL="http://www.gaisma.com"]www.gaisma.com[/URL]

          Comment

          Working...