My Solar Edge inverter is not receiving any power in it. I have tried recycling the power in it by following the steps found in this forum as well as what I found on youtube. However, it is just dead with the LCD blank. Any thoughts and suggestions? My installer has gone out of business. I called Solar Edge and have a service ticket open but they said I need someone with multimeter to troubleshoot this issue further.
No Power in Invertor
Collapse
X
-
-
Do you have a mutimeter or a friend with a multimeter?9 kW solar, 42kWh LFP storage. EV owner since 2012 -
Comment
-
If you had some way to confirm voltage at the AC terminals and the DC terminals that would be a start. The AC voltage would confirm that the circuit breaker is working. DC voltage might confirm that the panels and optimizers are working. The confirmation of AC would give you a basis to escalate at SolarEdge.9 kW solar, 42kWh LFP storage. EV owner since 2012Comment
-
Here's a one-time voltage tester:
For safety, wear earplugs and sun glasses, it can be quite loud
edit - this tester comes with a lifetime guarantee, it will last longer than your finger will. (leave voltage testing to qualified persons only)
VoltageTester.jpgLast edited by Mike90250; 09-21-2019, 02:26 AM.Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
|| Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
|| VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A
solar: http://tinyurl.com/LMR-Solar
gen: http://tinyurl.com/LMR-ListerComment
-
Here's a one-time voltage tester:
For safety, wear earplugs and sun glasses, it can be quite loud
VoltageTester.jpgComment
-
Comment
Comment