SunPower monitoring loose connection after blackout

[alex27riva]

Hi everyone, I'm from Italy and I have a problem with my SunPower monitoring system.
My monitoring system is composed of a data logger that receive the data from the SPR-3300 inverter via a RS-485 connection
Data logger.jpg

The data logger is connect wirelessly to the Gateway connected to my router via ethernet

gateway.jpg

The problem is: when the power goes out and return back, the data logger and the gateway loose the binding procedure, and I have to rebind the two devices.
Is that normal?
Does anyone have this monitoring system?
Bye

[SunEagle]

Maybe look into getting a small UPS to keep the data logger, Gateway and router up and running instead of needing to get a power reboot.

[Sunking]

You have to use either a UPS or battery. When a Router or Gateway looses power they go through a Cold Start.

[DanKegel]

Hi everyone, I'm from Italy and I have a problem with my SunPower monitoring system.
My monitoring system is composed of a data logger that receive the data from the SPR-3300 inverter via a RS-485 connection
The data logger is connect wirelessly to the Gateway connected to my router via ethernet
The problem is: when the power goes out and return back, the data logger and the gateway loose the binding procedure, and I have to rebind the two devices.

What do you have to do to rebind the two devices? (Is it one of the steps in https://us.sunpower.com/sites/sunpow...ting-guide.pdf ?)

FWIW I have to power up my cable modem and my router in a particular order for them to work