Wrong installation ?, 2 strings but 1 string in logical setup

[rpcdv]

I recently got a setup of 16 panels 370W installed and they installed it with 2 strings (2x8 panels) on my SE6000 with 16 S440 Poweroptimizers.
But the solaredge logical setup only shows 1 string, has this negative impact on the optimizers on both strings ?

Installer told me to have some patience to see if the KWH is getting better in a few months, but he didn't gave me an answer if this has a negative effect on the KWh produced because i think the setup is not correct.

[Mike 134]

Solar edge can have up to 25 optimizers on one string. If you are so inclined, open the bottom half of the inverter you'll see that the 2 strings are landed on a terminal block that parallels them.

You contact does not seem very educated how Solar edge works.

Single Phase Inverter with HD-Wave Technology Installation (solaredge.com) Pg 37 of the PDF

[solarix]

The displayed setup has nothing to do with the actual operation of the optimizers. If you like, you can change (or have your installer change) the displayed setup so it matches the actual setup...