Tweet
7769BC04-76FA-40BE-A34A-87F6048ED666.png1A9CEECE-377E-44B6-8FFC-D79C4E01C800.pngE49A0487-7587-454E-8DA4-006516B2B68C.png639191AA-9A75-445A-8614-36894504C4DC.pngB367D521-2C4A-43EB-96BA-3B58CB1B1E2F.png ok,so I just completed my (bought it used) original was installed on 2016 same state but different location)SolarEdge system se7600a 18x suniva 0pt335w and 18x SolarEdge optimizers p405..been a few days works great..then yesterday inverter only showing 17/18 optimizers..got freak out..did a few repairing optimizers ..now it’s only showing 17/17 ..what happened to my 18th one?
So I was able to pin down the one that’s not reporting. .swapped it to a different place in the string...did the whole thing repairing optimizers again ..and still it’s the same optimizer that’s failed to report to the inverter..my question is all of my others optimizers only shows anywhere from 0 to 5w but the failed one (panel 1.0.1 -1031A661-48) is showing 48.49 power (w) from Solaredge monitor please see pix I also included a few samples of the normal working optimizers . Can anyone pin point how ..why what wrong or just a failed optimizer ..or how do I resolve this.. much help is appreciated. Btw it’s 7:00 am here in Texas (no sun) right now. Thanks
So I was able to pin down the one that’s not reporting. .swapped it to a different place in the string...did the whole thing repairing optimizers again ..and still it’s the same optimizer that’s failed to report to the inverter..my question is all of my others optimizers only shows anywhere from 0 to 5w but the failed one (panel 1.0.1 -1031A661-48) is showing 48.49 power (w) from Solaredge monitor please see pix I also included a few samples of the normal working optimizers . Can anyone pin point how ..why what wrong or just a failed optimizer ..or how do I resolve this.. much help is appreciated. Btw it’s 7:00 am here in Texas (no sun) right now. Thanks
Comment