Schuco MPE 180 MS 05 for a Hybrid-ready system--Will they work?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • delete
    Junior Member
    • Sep 2010
    • 2
    #1

    Schuco MPE 180 MS 05 for a Hybrid-ready system--Will they work?

    I am trying to figure out if Schuco MPE 180 MS 05 panels will work with a system using an Outback FlexMax 60 solar controller and a Xantrex XW 4548 inverter charger--This is going to be mostly battery backup with capability for selling back in the future. Will they work

    I've called Schuco, and gotten no answer, just an endless phone maze. I've also called schuco dealers, and gotten the brush-off. If you don't know, could you point me to someone who does?
    Tags: None
    • Mike90250
      Moderator
      • May 2009
      • 16020
      #2
      If the Xantrex site for the xw6048, haden't been broken by schnider electric, I'd suggest using the sizer tool to "create" a system to see what the configration should be.
      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

      solar: http://tinyurl.com/LMR-Solar
      gen: http://tinyurl.com/LMR-Lister

        Comment

        Previous template Next
        Working...