Irreversible splice+Junction Box

[peakbagger]

I bought a Harbor Freight Tool and then had to grind one of the dies to match a "Burndy" It is definitely not as neat as the proper compression device but it does make an irreversible splice.

[wrlsguy]

What was the exact tool you bought? I see hexagon dies at Harbor Freight.

https://www.harborfreight.com/hydrau...=crimping+tool looks like what I bought. Nice to see some knowledge resurrected over 8 years later.

[MGE]

Same crimper I bought years ago at HF.
Only problem with them is having the die fall out if you hold the crimper wrong.