No announcement yet.

Attention all New Members

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Attention all New Members

    Hi All,

    Just wanted to let the newbs know a few things.

    Firstly in order to stop the flood of spam we USED to get we have gone to a manual approval process, so it may take a while to get approved as a new member as I dont look at SPT all day.

    Secondly ALL NEW MEMBERS first post will be automatically sent for moderation, this means your post may not be visible for some time, as the Mods and myself dont sit on SPT all day, so PLEASE dont keep trying to post the same post over and over, as this makes no difference as to when your post will be visible, and it just creates more work in cleaning up the mess, so the motto of the story is please be patient, all the mods are volunteers and things will get done when they get done, cheers.

  • #2
    Consider adding a warning about Unicode and make it a sticky.


    • #3
      Starting a new topic
      1) go to the parent forum
      2) partway down the page, under the banner ad, on the left side, will be a button labeled

      [B]+ New topic[/B]

      Click it, and be sure to enter a topic

      Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
      || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
      || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A