Spencer
Sorry mate. Cant tell from your numbers what firmware you have. You could try asking Victron.
Perhaps they know which version it was shipped with. I must say that they are great at answering questions.
However sometimes, strangely enough, they answer in dutch and I have to use google translate.
The Multi uses it's so called VE Bus to communicate with a computer.
VE Configuration tools are found here: http://www.victronenergy.com/support...oads/software/
and will automatically update and tell you which version of firmware you have.
You will need a special adapter (VE Bus to USB)(more money has to be spent in typical Victron style) to hock the computer up with the multi.
(A color control gx also tells you what processor and firmware you currently are at.)
After a comment on the victron forum yesterday I think i found a way of using all the PV energy even though having the old processor.
Using a grid BlueSolar Grid Inverter and going with the Hub2 v2
Check it out at the bottom of this page:
and "Overview of available assistants"
Ill have to do more research about it all though. Not to mention, spending some money... arrrggggh
Would be great to know what settings let you use your low end genset for charging.
All the best
/Oliver
Sorry mate. Cant tell from your numbers what firmware you have. You could try asking Victron.
Perhaps they know which version it was shipped with. I must say that they are great at answering questions.
However sometimes, strangely enough, they answer in dutch and I have to use google translate.
The Multi uses it's so called VE Bus to communicate with a computer.
VE Configuration tools are found here: http://www.victronenergy.com/support...oads/software/
and will automatically update and tell you which version of firmware you have.
You will need a special adapter (VE Bus to USB)(more money has to be spent in typical Victron style) to hock the computer up with the multi.
(A color control gx also tells you what processor and firmware you currently are at.)
After a comment on the victron forum yesterday I think i found a way of using all the PV energy even though having the old processor.
Using a grid BlueSolar Grid Inverter and going with the Hub2 v2
Check it out at the bottom of this page:
and "Overview of available assistants"
Ill have to do more research about it all though. Not to mention, spending some money... arrrggggh
Would be great to know what settings let you use your low end genset for charging.
All the best
/Oliver
Comment