I have what appears to be a professionally installed small off grid solar system with a ME-BMK that will not power up, and am now completely stumped as to why I can't get a BMK working...
Existing system:
MS4448PAE
ME-RC
ME-BMK.
Test Process:
Confirmed 2amp breaker to BMK is on.
Power cycled BMK beaker.
Validated Wires are in the correct places (Red opposite the side of terminal block from network cable)
Checked voltage to terminal Block (Same as batt 51.7v at the moment)
Verified voltage using paper clips to Inside of terminal block.
Swapping in new BMK, still not lights.
Swapped in new Terminal Block.
Swapped in new Terminal Block.
Validated no short across shunt.
Attempted to power up BMK with no connectors except power to validate no shorts or affect from external connections.
Email sent to Magnum Support.
Thanks for any ideas! All I have left is to try another unit, I did read another person that received a bad BMK...
-Dwight Morgan
Comment