Ok so, i just got another inverter and charge controller. Plus more panels. So now what I'm working with is, 3600 w at 24v from my new LG 365 panels and 800w at 12v from old panels. A flex power panel with 2 outback inverters 30/48 and one outback Charge controller. And now I have a third inverter and CC, they're exactly same as the ones on flexpower. My backup generator is kohler 12res propane. I am waiting till everything's set up before getting them. At this point thinking 8 l16
my question is, does it make sense to use my third inverter as well? I can't imagine needing 90 amps but you never knowI
I'm powering 5 hurts with lights and maybe minimal movie watching. I'm hoping the generator would only be used if there was a big load like table saw or stormy winter .I
Thanks for any input!
my question is, does it make sense to use my third inverter as well? I can't imagine needing 90 amps but you never knowI
I'm powering 5 hurts with lights and maybe minimal movie watching. I'm hoping the generator would only be used if there was a big load like table saw or stormy winter .I
Thanks for any input!
Comment