For those of you with a Schneider SW4048 inverter make sure you update your firmware before you use your inverter with a genset (or grid input). Mine bit the dust exactly as described in the this link:
http://lists.re-wrenches.org/piperma...16/092409.html
Schneider sent out a free Combox and updated firmware this fall but neglected to include anything about why the firmware should be updated or what could happen if it wasn't updated. I didn't update mine and paid the price. Schneider said I was supposed to receive a phone call about the issue but I never did.
Now I must state that Schneider has bent over backwards for me to make this right. Just posting this so other people don't fry their inverter.
http://lists.re-wrenches.org/piperma...16/092409.html
Schneider sent out a free Combox and updated firmware this fall but neglected to include anything about why the firmware should be updated or what could happen if it wasn't updated. I didn't update mine and paid the price. Schneider said I was supposed to receive a phone call about the issue but I never did.
Now I must state that Schneider has bent over backwards for me to make this right. Just posting this so other people don't fry their inverter.
Comment