Greetings-
I have a single 100w Renogy Solar Panel with a 30A PWM Renogy Solar Charge Controller and a 15aH MightMax Battery.
The device that is on the load is a 12v DC motor that pulls 150 mA.
In between the motor and the CC there is a PWM switch that is capable of speeding up and slowing down the rpms of the motor.
I am curious if I need fuse the positive lead coming in from the panel into the controller, and additionally the positive lead coming in from the battery to the CC.
Thanks ahead of time below are links to the components in the setup.
100W Panel:
15aH Battery:
30A Charge Controller:
150mAh Motor:
10A PWM Speed switch:
I have a single 100w Renogy Solar Panel with a 30A PWM Renogy Solar Charge Controller and a 15aH MightMax Battery.
The device that is on the load is a 12v DC motor that pulls 150 mA.
In between the motor and the CC there is a PWM switch that is capable of speeding up and slowing down the rpms of the motor.
I am curious if I need fuse the positive lead coming in from the panel into the controller, and additionally the positive lead coming in from the battery to the CC.
Thanks ahead of time below are links to the components in the setup.
100W Panel:
15aH Battery:
30A Charge Controller:
150mAh Motor:
10A PWM Speed switch: