MT50 meter readings

[ca jon]

Hi,
I have installed a 175w panel with a tracer mppt 20w controller. The MT50 meter reads 26V and 0.8A from the panel in direct sun. Is that normal?

[littleharbor]

If your battery is fully charged, which is what your readout is showing, then this may be fine. What does it show when your battery is partially discharged and, in full sun?

[SunEagle]

I agree with littleharbor. It looks like your battery is charged which will cause the CC to reduce it's amp output.

Try discharging the battery for a couple of hours and the charge it again. You should see closer to the Imp rating going to the battery.