Forgive the bad drawing it is not my strong point. My batteries the way I have them hooked up now have been really good at keeping an even charge across the batteries. I am about prepping the wiring to get ready for the whizbang jr and will be putting the shunt in so all will be ready. My question is does is matter where i hook the CC and inverter up inline. I understand those have to be between tied in the same spot but what would be the best place to hook them. I would like to bring the shunt in the garage on the wall but then the CC/inverter negative would also be inside and not connected on the middle of the cable connecting batteries as you can see from pic.
Is there a better way to wire is it not gonna matter to much.
Hope this made sense.
Just so you know yes all the wires com through the house to the CC and inverter in the same whole picture is a bad one but you get the point
Wiring..jpg
Is there a better way to wire is it not gonna matter to much.
Hope this made sense.
Just so you know yes all the wires com through the house to the CC and inverter in the same whole picture is a bad one but you get the point
Wiring..jpg
Comment