Science Project: need help with watts
Collapse
X
-
True, I assumed he would be making the measurements while the panel was operating. -
It's funny how many different ways we can come up with to say the same thing.
Edit: I'm wondering if he really means "power" since it's in his subject line.
Nathaniel, you can calculate the power produced by the panel by measuring the voltage across the panel + and - with a voltmeter, and multiplying that by current in the panel wires as described above. For example, 12.5V x 5.6 Amps = 70 Watts.
If you're using a charge controller that "chops" the panel DC on and off to regulate charge to a battery, such as a PWM controller, use a "True RMS" meter for both voltage and current.Leave a comment:
-
It's funny how many different ways we can come up with to say the same thing.
Edit: I'm wondering if he really means "power" since it's in his subject line.
Nathaniel, you can calculate the power produced by the panel by measuring the voltage across the panel + and - with a voltmeter, and multiplying that by current in the panel wires as described above. For example, 12.5V x 5.6 Amps = 70 Watts.
If you're using a charge controller that "chops" the panel DC on and off to regulate charge to a battery, such as a PWM controller, use a "True RMS" meter for both voltage and current.Leave a comment:
-
Leave a comment:
-
If you are trying to measure the current when it is not connected to anything, set your multimeter to amps (you may need to move the leads) and measure across the plus and minus. If you are trying to measure while they are connected, interrupt the negative wire and put the multimeter leads in line with the negative, putting the meter in series with the circuit.
If your multimeter doesn't have a DC Amp feature, there are some inexpensive digital DC amp meters on Amazon.Leave a comment:
-
If you are trying to measure the current when it is not connected to anything, set your multimeter to amps (you may need to move the leads) and measure across the plus and minus. If you are trying to measure while they are connected, interrupt the negative wire and put the multimeter leads in line with the negative, putting the meter in series with the circuit.
If your multimeter doesn't have a DC Amp feature, there are some inexpensive digital DC amp meters on Amazon.Leave a comment:
-
You could use the DC Amps function of a simple multimeter if its max current rating is more than expected from the panels. Or, passing the panel current through a current shunt will let you use a DC voltmeter (such as a simple multimeter) to to measure currents that are much larger than the meter's built-in current function is capable of. See here for a good description of current shunts used in this way. It's about halfway down the page.Leave a comment:
-
Something like this works well. How much current do you want to measure? There may be less expensive alternatives.Leave a comment:
-
Science Project: need help with watts
Hello
I am doing a College Science project on Solar Energy and I would like to know if any one has a way of measuring the amount of DC current coming from the panels?
Thanks!
Nathaniel
Leave a comment: