I have a saferoom/storm shelter that I going to light solely on 12v led and I want to run a few ham radios. At most current needed is 30 amps. Here is my current list and how I'm going to install it.
Two Suniva 310W Solar Panel wired in series to produce around 90 volts. Need highter voltage because im running 200 feet to the controller and don't want to get huge and expensive with the wiring. 10 gauge should be plenty because it's at 9 amps
A Outback Power FLEXmax FM60 MPPT Charge Controller because of the high voltage and stepping it down to 12v..
Two Trojan L-16H type, 6V-435AH wired for 12v
Also can add another pannel in series to make 140 volts if more charge is needed
So this is my very first experience and I wanted to ask if I'm missing something?
Thanks
Two Suniva 310W Solar Panel wired in series to produce around 90 volts. Need highter voltage because im running 200 feet to the controller and don't want to get huge and expensive with the wiring. 10 gauge should be plenty because it's at 9 amps
A Outback Power FLEXmax FM60 MPPT Charge Controller because of the high voltage and stepping it down to 12v..
Two Trojan L-16H type, 6V-435AH wired for 12v
Also can add another pannel in series to make 140 volts if more charge is needed
So this is my very first experience and I wanted to ask if I'm missing something?
Thanks
Comment