Announcement

Collapse
No announcement yet.

DIY solution 51.2V 100Ah solar energy storage battery pack

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DIY solution 51.2V 100Ah solar energy storage battery pack

    This is a DIY solution for home solar energy storage. The supplier offers all the materials, accessories, and tools in the video. Anyone who wanted to DIY their own energy storage system can check this.

    <Link removed>
    Last edited by sdold; 10-26-2020, 02:33 PM.

  • #2
    Originally posted by Jwilmes Brady View Post
    This is a DIY solution for home solar energy storage. The supplier offers all the materials, accessories, and tools in the video. Anyone who wanted to DIY their own energy storage system can check this.
    This is also a recipe for a fire.
    No cell balancing prior to assembly
    No visible over current protection
    No warning about ramming screws into the battery cell
    No indication for proper torque, just using a drill with a screwdriver bit

    Just put it in your room and breathe the fumes !!


    Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
    || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
    || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

    solar: http://tinyurl.com/LMR-Solar
    gen: http://tinyurl.com/LMR-Lister

    Comment


    • #3
      Another example of why u-tube is called the new idiot's bible.

      Comment


      • #4
        Originally posted by Mike90250 View Post

        This is also a recipe for a fire.
        No cell balancing prior to assembly
        No visible over current protection
        No warning about ramming screws into the battery cell
        No indication for proper torque, just using a drill with a screwdriver bit

        Just put it in your room and breathe the fumes !!

        Thanks for your professional suggestions.

        Comment


        • #5
          There is so much advancement in battery tech, that the sellers never mention any of the precautions that need to be taken. The reports of hoverboards, cell phones and laptops overheating because of battery issues, have not gone away. House hold size batteries are no exception of the be aware and careful. The problem is, 99% of people have no idea of the danger improperly handled batteries present. Like filling a lawnmower with a running engine, only not so obvious.
          Powerfab top of pole PV mount (2) | Listeroid 6/1 w/st5 gen head | XW6048 inverter/chgr | Iota 48V/15A charger | Morningstar 60A MPPT | 48V, 800A NiFe Battery (in series)| 15, Evergreen 205w "12V" PV array on pole | Midnight ePanel | Grundfos 10 SO5-9 with 3 wire Franklin Electric motor (1/2hp 240V 1ph ) on a timer for 3 hr noontime run - Runs off PV ||
          || Midnight Classic 200 | 10, Evergreen 200w in a 160VOC array ||
          || VEC1093 12V Charger | Maha C401 aa/aaa Charger | SureSine | Sunsaver MPPT 15A

          solar: http://tinyurl.com/LMR-Solar
          gen: http://tinyurl.com/LMR-Lister

          Comment

          Working...
          X