FlexMax 80 Outback & Lithium Batteries
Collapse
X
-
If they are LiFePO4, set the Flexmax to Absorb to 13.6v (3.4v/cell), absorb time 30mins. Set float to 13.4(3.35v/cell). Turn off temp compensation and equalisation. -
The batteries will have their own specs, much like every mfg of lead acid batteries has their own specs.
Better question is will the BMS be able to handle such a large bank and charging source ?Leave a comment:
-
FlexMax 80 Outback & Lithium Batteries
Hi All,
I have a question if here's anybody around who has experience with Outback FlexMax 80 and lithium batteries.
I'm setting up a 12 volt battery bank with 720Ah capacity.
Anybody can advise about the right charger settings for lithium batteries?
Many thanks upfront
Kind regards
Johan
Leave a comment: