Announcement

Collapse
No announcement yet.

Charging lithium pack with solar without BMS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by GeorgeF View Post
    With above hvd and lvd I ment in fact that i really cut-off high and low voltages with low voltage disconnect modules. A chargecontroller for solar charging and extra high voltage disconnect + low voltage disconnect module between the charger and battery pack as most chargecontroller do not cut-off but change to float mode. So when i really cut-off Im wondering then if i need a bms if set the setpoints accordingly.
    If you are monitoring cell voltages and disconnecting when cells go out of range - you have a BMS.

    Comment

    Working...
    X